Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Seven Corners?
Garage door repair in Seven Corners typically costs $150 – $600, and most spring, cable, and opener jobs land inside that range. A new door installation runs $700 – $2,200 depending on size and material. Spring repair is $180 – $340 for one spring, and we give you a written estimate before any work begins so the price is set per job.
We’re Pryor Garage Door Repair, and garage doors are the only thing we work on. Call (844) 917-3733 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Garage Door Cost Breakdown (2026)
Here’s what the common jobs run in Seven Corners this year. These are typical estimated ranges for the local market, not a quote. Your written estimate sets the final price.
| Job | Typical Estimated Range |
|---|---|
| Garage door repair (general) | $150 – $600 |
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2,200 |
One thing worth knowing about springs: that $180 – $340 figure covers one spring. Torsion systems usually run a matched pair, and a pair is normally replaced together, so a two-spring job costs about twice that range. We’ll tell you which setup you have before we start.
What pushes a job toward the top of a range? Heavy insulated doors, rusted or bent hardware that has to be cut out, a door that’s come off its track, or a legacy opener that needs a control board. What keeps it near the bottom? A single worn roller set, a snapped cable on an otherwise sound door, or a simple opener adjustment.
What Affects Garage Door Pricing in Seven Corners
- Door size and weight. Seven Corners has a lot of mid-century split-levels and older colonials with single-car garages, plus newer townhome builds near Route 7 with double doors. A heavier double door needs stronger springs and more hardware, and that’s the biggest single swing in repair cost.
- Spring type. Torsion springs (mounted on a shaft above the door) and extension springs (running along the sides) price differently, and torsion setups often use a pair. We confirm which you have and quote accordingly.
- Brand and part availability. We’re factory-familiar with LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. Knowing your brand means the right part the first time instead of a second visit, which keeps the total down.
- How far gone the door is. A door that’s been grinding for months usually needs more than the part that finally failed. Catching a worn roller or a fraying cable early keeps the job in the lower half of the range.
- Opener age and type. A chain-drive Craftsman from the 1990s and a modern smart opener from LiftMaster or Chamberlain are different repairs. Legacy units sometimes need discontinued parts sourced, which affects both cost and timing.
- Whether it’s a repair or a replacement. A door with one bent panel is a panel job at $250 – $500. A door with a cracked frame, failing sections, and tired hardware is often cheaper to replace outright than to keep patching.
Weather plays a part too. Northern Virginia’s humid summers and freeze-thaw winters work on steel panels, hinges, and springs year after year. Doors on the sunny side of a house take more heat cycling, and that’s usually where we find the first fatigue cracks in a spring.
How to Save on Garage Door
You don’t need a coupon to keep a garage door bill reasonable. A few habits do most of the work.
- Fix the small thing first. A $110 – $220 roller replacement now beats a track realignment plus a cable job later. Squeaks and shudders are early warnings, not background noise.
- Replace springs as a pair. When one torsion spring snaps, the other has taken the same wear. Doing both at once costs about twice one spring but saves a second service call and a second estimate down the road.
- Get the estimate in writing before work starts. Ours are free. That means you know the number before anyone touches the door, and you can compare it against another quote without pressure.
- Match the opener to the door. An oversized opener on a light door wears out faster, and an undersized one strains. If you’re replacing an opener, we’ll size it correctly the first time.
- Don’t DIY the springs. We mean this one. High-tension springs and cables store enough force to cause serious injury, which is why many general handymen won’t touch them. Leave that work to a trained technician.
When you’re ready for a number, call (844) 917-3733. The estimate is free and there’s no obligation. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Repair or Replace? The Math for Seven Corners Doors
As a rough rule, if the repair comes in under about a third of what a new door would cost and the door itself is structurally sound, repair usually wins. A $200 spring job on a solid Clopay or Amarr door is an easy call. A $900 string of repairs on a door with rusted-through bottom sections, a bent track, and a failing opener is money you won’t get back, and a new door at $700 – $2,200 starts to make more sense.
Age matters less than condition. A well-built Wayne Dalton door from decades past can outlast a cheap recent one. What we look at is the frame, the panel seams, the track, and whether the hardware is still straight.
What Does a Same-Day Repair Cost in Seven Corners?
Same-day repair costs the same as any other repair: $150 – $600 typical, set by the written estimate. We don’t add a premium for fitting you in sooner. If your door won’t close, call (844) 917-3733. A door stuck open is a security problem and a door stuck closed is a safety trap, and we treat both as urgent. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday.
Why Brand Familiarity Keeps Your Bill Down
We work on eight major brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That means when you call about a Genie opener that won’t reverse or a LiftMaster that’s lost its remote pairing, we know the system before we arrive and bring the right part on the first visit. No guessing, no “we’ll have to order it and come back.”
It also means we can tell you honestly whether a repair is worth doing. Some older openers are fine with a $120 – $320 repair. Others are past the point where that money makes sense, and we’ll say so.
Our technicians have up to 10 years of experience, and every job we connect you with is handled by a local pro who is licensed and insured as their state requires.
Full-Service Coverage Under One Name
From a snapped spring to a brand-new door, the whole lifecycle of a garage door system stays with us. That covers garage door repair, opener repair, spring repair, panel replacement, new installation, and emergency calls when a door won’t move. If you’re comparing us to a general handyman, note that most won’t handle torsion springs at all, and an HVAC company that does doors on the side isn’t going to know your LiftMaster from your Chamberlain.
For a closer look at what we do and how we work, see Pryor Garage Door Repair. We also serve homeowners across the surrounding area, including garage door repair in Falls Church, repair service in Arlington, garage door repair in Fairfax, repair in Alexandria, garage door repair in McLean, repair in Annandale, and repair in Vienna.
FAQs – Garage Door Cost
How much does garage door repair cost in Seven Corners?
Garage door repair in Seven Corners typically costs $150 – $600, depending on the job. Spring repair is $180 – $340 for one spring, cable repair is $130 – $250, and opener repair is $120 – $320. Call (844) 917-3733 for a free estimate.
Is it cheaper to repair or replace my garage door?
Repair is usually cheaper when the door is structurally sound and the fix is under about a third of a new door’s cost. A new door runs $700 – $2,200. If you’re looking at several repairs at once, replacement often wins on total cost. Call (844) 917-3733 and we’ll give you both numbers so you can decide.
How much does a new garage door cost in Seven Corners?
A new garage door installation in Seven Corners typically costs $700 – $2,200, depending on size, material, and insulation. Double doors and insulated panels sit at the higher end. Get your written estimate by calling (844) 917-3733 – it’s free.
Can you come today for a garage door problem?
Yes, same-day service is part of what we do, at no extra charge over the standard range. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. Call (844) 917-3733 to book.
How much does opener repair or replacement cost?
Opener repair runs $120 – $320 and a full opener installation runs $250 – $550, whether you have a legacy chain-drive unit or a modern smart opener. Call (844) 917-3733 for a free estimate on your exact system.
Get Your Free Estimate
We know what a jammed door does to your day. Our technicians have up to 10 years of experience, we’re factory-familiar with eight major brands, and we handle everything from a single worn roller to a whole new door. Call (844) 917-3733 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Seven Corners market as of 2026. Pryor Garage Door Repair offers free estimates – call (844) 917-3733.
Written by the team at Pryor Garage Door Repair.
What Our Customers Say
"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Tara Barrett"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Paige Schaefer"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Lamont Boyd