Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Arlington?
Spring replacement in Arlington typically costs $180 to $340 for a single torsion or extension spring, and that price includes the new spring, the labor, and balancing the door afterward. A matched pair is usually replaced together, so a pair runs about twice that range. The written estimate we provide after looking at your door is what sets the final price, and the estimate itself is free.
Most spring jobs are one-visit repairs. We answer 24/7 at (844) 917-3733, and fast dispatch from 7am to 7pm means a snapped spring usually gets handled the same day you call. Our technicians have up to 10 years of experience, and springs are a core service here, not something we hand off to a generalist.
Key Takeaways
- One spring: typically $180 to $340. A matched pair: about double, since both springs normally get swapped at once.
- The price covers the spring, the labor, and winding the door back into balance.
- Arlington housing stock matters: older North Arlington garages often use extension springs, while newer builds and townhomes lean toward torsion systems, and the two price differently.
- Free estimates, and the written estimate is the final price. Call (844) 917-3733.
Spring Replacement Cost Breakdown (2026)
The table below covers what a typical spring job looks like in Arlington this year. These are estimated ranges for this market, not a fixed menu, because the exact configuration of your door decides where in each range you land.
| Line Item | Typical Estimated Range |
|---|---|
| Torsion spring replacement (one spring) | $180 – $340 |
| Torsion spring replacement (matched pair) | About double the single-spring range |
| Extension spring replacement (one spring) | $180 – $340 |
| Cable repair (often needed alongside a spring) | $130 – $250 |
| Roller replacement (worn rollers found during the repair) | $110 – $220 |
| Track realignment (if the door jumped track when the spring failed) | $120 – $240 |
| Panel replacement (if a panel buckled under the dead door) | $250 – $500 |
| Opener repair (when the opener was strained pulling a heavy door) | $120 – $320 |
| Full garage door repair, general | $150 – $600 |
What pushes a bill toward the top of the range? Heavy double doors on wide openings, doors with two torsion springs instead of one, and jobs where the failed spring took something else with it. When a torsion spring snaps, the door drops hard, and that impact can bend a track, fray a lift cable, pop a hinge, or crack a bottom panel. If we find any of that, you’ll see it in the estimate before we start, line by line. What keeps it at the bottom of the range: a single standard spring on a single-car door with everything else still sound.
Why a pair costs about twice a single spring
Springs are wound in opposing pairs on most two-spring doors and share the load. When one fails, the other has already absorbed the same number of cycles, so it’s living on borrowed time. Replacing both at once costs roughly double the single-spring price, but doing them separately means paying for the same labor twice within a year. We’ll tell you plainly which situation you’re in after we look at the door.
What Affects Spring Replacement Pricing in Arlington
Arlington isn’t a one-type-of-house town, and that shows up in spring pricing more than most people expect.
- Door type and spring type. Single-car doors with extension springs sit at the simpler end of the range. Wide double doors or heavy wood-look steel doors with a two-spring torsion setup sit at the top, because there are two springs, more wire gauge, and more winding and testing to do.
- The age and style of the garage. Older garages in neighborhoods like Lyon Village, Ashton Heights, and Cherrydale often have lower headroom and extension springs running along the ceiling, while newer construction and townhomes around Ballston and Clarendon usually use torsion springs above the door. The two systems need different parts and different labor, so they don’t quote the same.
- Cycle life of the spring you choose. A standard spring and a high-cycle spring both fit the same door, but the high-cycle version is built to last longer and costs more up front. We’ll lay out both options and let you weigh it, rather than quietly installing the cheaper one.
- Collateral damage from the break. A snapped spring is a violent event. Cables, drums, rollers, and bottom brackets all take the hit, and whether they need replacing is often the single biggest swing factor in the total. Anything we find goes into the written estimate first.
- Door condition and accessibility. A door that’s out of balance, has a binding track, or sits in a tight garage with a low clearance takes longer and sometimes needs extra adjustment. Same job, more time, different number.
- What was done before. A door with mismatched springs, mixed brands of hardware, or a previous repair that wasn’t set up correctly takes extra work to bring back to spec before the new springs can go in.
Is Spring Replacement Worth It, or Should You Replace the Door?
Replacing the springs is almost always the right call when the door panels, tracks, and frame are in good shape. Spring replacement runs $180 to $340 for one spring, while new door installation runs $700 to $2200. If the structure of the door is sound, spending a few hundred on springs is the obvious choice.
Door replacement starts to make sense when the panels are rusted through, the door has been hit by a car, multiple panels are dented, or the style and insulation are no longer what you want. If you’re weighing a full new door, our Pryor Garage Door Repair team can walk through the options for your opening without pushing you toward the bigger job. Either way, the estimate is free and there’s no obligation.
How to Save on Spring Replacement
Springs are a safety-critical part, so “saving money” here means avoiding upsells and avoiding repeat visits, not cutting corners on the parts themselves.
- Get a written estimate before any work starts. The written estimate is what sets the price. If someone wants to quote you a number off the top of their head without looking at the door, that’s a sign to get a second opinion.
- Replace both springs together when the door has two. It feels like spending more today, but it usually saves the second service call. We’ll tell you honestly whether the second spring is on its last legs or has real life left.
- Ask for the parts in writing. Spring wire gauge, cycle rating, and the brand of hardware should appear on the estimate. That way you can compare like for like if you get another quote.
- Address small issues during the same visit. If the rollers are shot or a cable is frayed, fixing it while the technician is already on the door is cheaper than a separate call later.
- Don’t pay for an emergency premium. We don’t charge more for same-day spring work. The price is set by the estimate, not the clock.
- Book the estimate early. A spring that’s still working but showing wear is a scheduled job; one that snaps on a Sunday is an urgent one. Catching it early keeps you out of the scramble.
Free estimates are one call away. Call (844) 917-3733. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What Happens During a Spring Replacement Visit
A spring replacement visit starts with the door coming down and staying down. We inspect both springs, the cables, the drums, the rollers, and the hinges while the door is under tension, then confirm what’s needed and review the estimate with you before any part is swapped.
The old spring comes off, the new spring goes on, and we cycle the door several times to confirm balance, alignment, and smooth travel. Finally we check the opener’s force setting and safety reverse, since a fresh spring changes the load on the opener. Most single-spring jobs finish on the same visit, and the door is tested and balanced before we leave. If we find more than the spring failed, the extra line items are already on the estimate before we touch anything.
Our technicians are trained and experienced on 8 major brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That means when your door’s hardware is one of those, we already know the configuration, and same visit, right part is the normal outcome. When you’re ready to schedule, see our spring replacement page for the full breakdown of the service.
Why Spring Repair Isn’t a DIY Job
Torsion springs on a standard Arlington door are under hundreds of pounds of tension. When one lets go, it lets go with a crack that sounds like a gunshot, and the wounding bars and hand tools that pass for a home setup don’t hold up to that load. Cables and springs are the two parts of a garage door system that can seriously injure someone when handled wrong.
That’s why our team treats spring repair as a specialty, not filler work. Many general handymen and multi-trade contractors won’t touch a torsion spring, and for good reason. If your door’s spring is broken or the door won’t lift, call us rather than trying to rig something. It’s the safest way through a bad day. The same caution applies if a cable is hanging loose or the door is crooked in its tracks: keep people and vehicles clear of the door and call for a technician.
Frequently Asked Questions
How much does a single spring replacement cost in Arlington?
A single spring replacement in Arlington typically runs $180 to $340, including the spring, labor, and balancing. If your door has two springs, the usual practice is to replace both at once, which costs about double the single-spring price. Call (844) 917-3733 for an exact quote on your door: estimates are free.
Can you come the same day for a broken spring?
In most cases, yes. We answer 24/7, with fast dispatch from 7am to 7pm, so spring calls placed during the day are usually handled the same day. If you call when dispatch isn’t running, your call is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (844) 917-3733 to check what’s available.
What does a spring replacement include for the price?
The typical price covers the new spring, the labor to remove and install it, and re-balancing the door. If we find a frayed cable or worn roller during the job, it shows up as a separate line item on the written estimate before we proceed. Nothing gets added to the bill without your OK. Call (844) 917-3733 to schedule a free estimate.
Is it cheaper to repair the springs or replace the door?
Repair the springs, almost always, when the door itself is sound. Spring replacement runs $180 to $340 for one spring, while full door replacement runs $700 to $2200. If panels are rusted through, badly dented, or the door has been badly damaged in an impact, a new door may make more sense. Call (844) 917-3733 and we’ll give you both numbers honestly.
How much does a pair of springs cost in Arlington?
A matched pair of springs costs about twice the single-spring range, so roughly $360 to $680 depending on the spring spec and door weight. The pair price covers both springs, the labor, and balancing. Because both springs usually fail at similar times, replacing them together is the standard call. Call (844) 917-3733 for a written estimate on your specific door.
Book a Spring Estimate in Arlington
If your garage door has snapped, is stuck partway, or the door feels heavy in a way it didn’t last month, don’t wait for it to fail in a harder spot. Pryor Garage Door Repair handles spring replacement as a core service across Arlington. Our technicians have up to 10 years of experience, are trained on 8 major garage door brands, and come out prepared to do the job right in one visit.
Call (844) 917-3733. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, the written estimate sets the final price, and you’ll know exactly what a spring replacement costs before any work begins.
Written by the team at Pryor Garage Door Repair.
Pricing reflects the Arlington market as of 2026. Pryor Garage Door Repair offers free estimates – call (844) 917-3733.
What Our Customers Say
"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Tara Barrett"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Paige Schaefer"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Lamont Boyd